Sharp Aquos LC-32LE244E Instrukcja obsługi - Strona 19
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla TELEWIZOR LCD Sharp Aquos LC-32LE244E. Sharp Aquos LC-32LE244E 33 stron. Lcd colour television
Również dla Sharp Aquos LC-32LE244E: Instrukcja serwisowa (38 strony), Instrukcja serwisowa (40 strony)
Drukuj stronę
Selected
item
Bass
This function allows you to enjoy
bass-enhanced sound.
Enhancer
Surround
Automatically switch the TV to the
best surround sound mode available
Sound
from a broadcast. (On,Off)
AVL (Auto
Reduce sudden volume changes,
for example, during commercials or
Volume
when switching from one channel to
Leveling)
another. (On,Off)
Dynamic
Set the control of audio compression
for some digital TV programmes.
Range
(On,Off)
Control
• MPEG-1 and MPEG-2 audio
programmes are not supported.
Digital Audio Output
Selected
item
Audio Format
Select the type of digital audio out.
(PCM, Auto)
Audio Delay
The audio delay timing to set Auto or
Manual for audio/video display timing
adjustment.
Audio Delay
When Audio Delay set to Manual,
audio delay time to adjust (only if the
Time (ms)
Audio Delay is Manual).
Audio Description
Selected
item
Audio
Set the mix of visually impaired audio
Description
with regular audio. (On, Off)
Mixing Level
Adjust the volume of visually impaired
audio.
SHARP_LE144E_1_GB_English.indd 17
SHARP_LE144E_1_GB_English.indd 17
Description
Description
Description
Setup
Press MENU.
Press
to select Setup, and press OK.
Language
Select the menu display language.
Country
Select the country where you are located.
The TV installs and arranges channels according to
your country.
Tuner Mode
Select the tuner mode. (Antenna, Cable)
Auto Tuning
See page Channel Setting.
ATV Manual Tuning
See page Channel Setting.
DTV Manual Tuning
See page Channel Setting.
DTV Settings
See page DTV Settings.
Connection Setting
E Lip Sync
This option activates an auto audio/video display timing
adjustment function that allows HDMI source devices
to accurately perform synchronization automatically.
All of the above HDMI settings require a proper HDMI
source device. If HDMI source products do not support
these functions, the TV may not work properly when
activating these functions.
NOTE
• In a non-HDMI signal mode, this function is not available.
• If your HDMI connection is capable of 1080p and/or
your TV is capable of refresh rates greater than 60Hz or
supports Deep Colour, you will need a Category2 cable.
Conventional HDMI/DVI cables may not work properly
with this mode.
TV Menu
- 17
5/31/2012 2:55:54 PM
5/31/2012 2:55:54 PM