Sharp Aquos LC-32SH330E Instrukcja obsługi - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla TELEWIZOR LCD Sharp Aquos LC-32SH330E. Sharp Aquos LC-32SH330E 34 stron. Lcd colour television
Drukuj stronę
TV menu
E Assign a channel decoder (For ATV)
Decoders that decode channels can be connected
to SCART. You have to assign the TV channel as a
channel to be decoded. Before selecting channels,
make sure your TV is connected to SCART.
1�
Press MENU on the remote control and select
TV ≥ Channels�
NOTE
• You are prompted to enter current password to enter
Channels if Channel Block /Parental Guidance /
Input Block in the Parental menu is not the default
setting.
2�
Press <> to select Decoder and press OK or
≥ to enter available analogue channel list.
3�
Press <> to select the channel to decode.
4�
Press OK to mark or cancel.
5�
Follow the on-screen instructions to exit.
E Analogue Ch Fine Tune
You can manually fine tune analogue channels when
reception is poor.
1�
Press MENU on the remote control and select
TV ≥ Channels.
NOTE
• You are prompted to enter current password to enter
Channels if Channel Block / Parental Guidance /
Input Block in the Parental menu is not the default
setting.
2�
Press <> to select Analogue Ch Fine Tune
and press OK or ≥ to enter the analogue
channel list.
3�
Press <> to select one channel and press OK
to enter.
4�
Press ≤≥ to adjust the frequency.
5�
When complete, press OK to set the frequency.
The fine tuned channel is stored under the
current channel number.
6�
Follow the on-screen instructions to exit.
E Clean Channel List
Select to clean all the channels that stored in the
channel list.
1�
Press MENU on the remote control and select
TV ≥ Channels�
NOTE
• You are prompted to enter current password to enter
Channels if Channel Block /Parental Guidance /
Input Block in the Parental menu is not the default
setting.
2�
Press <> to select Clean Channel List and
press OK or ≥ to enter.
3�
Select OK and press OK on the remote control
to clean channel list.
16
Features
Select menu language
Select the menu display language.
1�
Press MENU on your remote control and select
Features ≥ Menu language.
2�
Press ≤≥ to select your language.
3�
Follow the on-screen instructions to exit.
4:3 Mode
Select aspect ratio behavior for Auto mode. When 4:3
is selected, the picture size will follow WSS or Scart
Pin8 Spec. If 16:9 is selected, the picture format will
change to wide screen.
1�
Press MENU on your remote control and select
Features ≥ 4:3 Mode.
2�
Press ≤≥ to select the mode your preferred.
3�
Follow the on-screen instructions to exit.
Change picture format
Change the picture format to suit your content.
1�
Press ∏ repeatedly to select one of the
following picture formats. Alternatively, press
MENU and select Features > Picture Format.
Auto
Normal (Not for HD)
NOTE
• Constant use of the Normal picture format can cause
screen distortion.
The Automatic format
for DTV transports
streams with AFD
information, while
for ATV and SCART
should be with WSS
information.
Displays the classic 4:3
format.