DIGISYNTHETIC DSM 204 Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt nagrywający DIGISYNTHETIC DSM 204. DIGISYNTHETIC DSM 204 10 stron. Professional mixing console dsp
9 SUPPLY AND POWER SECTION
50 51 52
53
50
51
52
53
54
50 AC POWER CARD
AC200V-240V 50-60Hz
51 FUSE HOLDERS
When occur a problem on this appliance,the fuse will be cut off power to prevent fron problem. Fuse: TIA
(DSM-104 DSM-134 DSM-164 DSM-204) T4-6A(DSM-1043 DSM-1345)
52) POWER SWITCH
Push this switch
ON , when you want to operate, the power LED (32) will be light up.
53) PHANTOM POWER SWITCH:
Switch for activating the 48Vpower on the MIC input connectors (1)of the mono channels; the LED
illuminartes to indicate the power is on. The phantom power supply is necessary for many professional
capacitor microphones.
54) OUTPUTSL/R
Speakon connector sockets. These allow a pair of loudspeaker enclosures to be connected to the built-in
amplification circuit. These enclosures must have an minimum impedance of 4ohm.