DIGISYNTHETIC DS224E(WiFi) Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler DIGISYNTHETIC DS224E(WiFi). DIGISYNTHETIC DS224E(WiFi) 10 stron. Digital loudspeaker management
Drukuj stronę
3.3.8
Lock / Unlock the Buttons & Encoder
® Rotary E
Push the
ncoder to lock all Buttons and Rotary Encoder.
®
Push
Rotary E
ncoder again to unlock.
3.3.9
Set WIFI Mode
®
Press RECALL to return to program management and function set
menu at the channel parameter set display.
Then press MAIN MENU < or > till the menu (WIFI MODE) as
the lower left picture displays.
®
Press MAIN MENU < or >till the menu (WIFI MODE) as the
lower left picture displays at the program management and
function set menu.
®
Rotate the encoder to change the WIFI Mode.
®
Press SAVE/ENTER, complete change the
8 WIFI MODE
MODE:Slave
®
The Master Mode will turn on the
Master device, we can connect other Slave device(s) by RS485
port at this Mode, all connected device can be controlled by
IPAD APP or PC Software.
®
The Slave Mode will turn off the
Slave device
(s)
, all Slave device
USB port or by RS485 use Slave Mode .
3.3.9
Reset WIFI
®
Press RECALL to return to program management and function set
menu by parameter set display. Then press MAIN MENU < or >
till the menu (RESET
WIFI
®
Press MAIN MENU < or >till the menu (RESET
lower left picture displays at the program management and
function set menu.
®
Press SAVE/ENTER, complete reset the
9 RESET WIFI
RESET
3.4 Parameter Range of Program Management and Configuration
Setting
Items
Range
Load User Program
1 ~ 30
Program Number: 1 ~ 30
Store User Program
Program Name: ASCII Charater
1 ~ 10
Load Preset Program
Erase User Program
1 ~ 30
Set Language
Chinese / English
Set Device Address
1 ~ 32
Type: Change, Change&View,
Lock / Unlock Device
Change & Mute, Everything
Password: ASCII Charater
WIFI
Mode.
WIFI
and change the device as
WIFI
and change the device as
(s)
can be controlled only by
) as the below picture shows.
WIFI
) as the
WIFI
.
3.5 Channel's Parameter Range
Items
Gain
Delay
PEQ Bands
PEQ Bypass
PEQ Type
PEQ Frequency
PEQ Gain
PEQ Bandwidth
Phase-Shifter
GEQ Bands
GEQ Bypass
GEQ Gain
Compressor's
Knee
Compressor's
Threshold
Compressor's
Ratio
Compressor's
Attack-Time
Compressor's
Release-Time
High/Low-Pass
Filter Frequency
High/Low-Pass
Filter Solpe
Phase Inverter
4 Software Installation
Steps
Put the CD enclosed in the computer, open the file SETUP.EXE in
the CD to launch the software. Set-up window will pop-up, click
the NEXT button and do it step by step till the installation is
1
completed.
1
1
1
-
1
-
6
Range
-40dB ~ +12dB
ON/OFF,
0ms~2000.02ms
1 ~ 9
ON/OFF
PEQ, Low-Shelf 6dB,
Low-Shelf 12dB, High-
Shelf 6dB, High-Shelf
12dB, Phase-Shifter
19.7Hz ~ 21.9kHz
-30dB ~ +15dB
0.017 ~ 4.750 Oct
0°~178°
1 ~ 31
ON/OFF
-30dB ~ +15dB
Off/Hard knee/Soft knee
1/Soft knee 2/Soft knee
3/Soft knee 4/Soft knee 5
-20dB ~ +20dB
1.2, 1.5, 2, 3, 4, 6, 10, 20,
40, 128
0 ms ~100ms
50 ms ~1000ms
19.7Hz~21.9kHz
Flat, 12dB Bessel,
12dB Butterworth,
12dB Linkwitz-Riley,
24dB Bessel,
24dB Butterworth,
24dB Linkwitz-Riley,
36dB Bessel,
36dB Butterworth,
36dB Linkwitz-Riley,
48dB Bessel,
48dB Butterworth,
48dB Linkwitz-Riley
0°/180°
Steps
1dB/0.1dB
105/10.5/1.05/
0.105/0.021(ms)
-
-
-
Coarse/Fine
1dB/0.1dB
-
1°
-
-
1dB/0.1dB
-
0.5dB
-
1ms
50ms
Coarse/Fine
-
-