DIGISYSTEM AP020201 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zasilanie DIGISYSTEM AP020201. DIGISYSTEM AP020201 9 stron. Variable frequency vibrators power supply

Drukuj stronę

TECHNICAL SPECIFICATIONS

Power supply:

Output voltage:

Output compensation:

Output frequency:

Current:

Fuses:

Voltage output:

Remote commands:

Mechanical protection:

EMI Protection:

Wiring:

Dimensions:

Weight:

230Vac ± 15%, frequency 50 or 60 Hz

from 50 to 220Vca (with power supply 230Vca)

compensation of power supply variations

from 3,0 to 199,9 Hz in step of 0,1 Hz

maximum current 5 Amperes peak (about 2,5 Arms) limited

from a circuit with autoreset

4 A fast action 250Vac; dimensions 5x20

soft-start with ramp of about 0,5 seconds

start/stop with external voltage PNP

(15 ÷ 30 Vdc, current 10 mA)

external potentiometer

voltage reference 0 ÷ 5 Vdc

start/stop NPN

IP 50 (on request IP 54)

meets following regulations: LVD CEI EN60439-1

If observed wiring instructions.

fairlead and wire with shuko for mains input and HAN-3A

Harting connector for vibrator output.

169 x 120 x 76 mm (height, breadth, depth)

(90 mm must be provided in low side for connector insertion)

1,2 Kg

optocoupled

see page 9

EMC CEI EN50082-2

EMC CEI EN50081-2