Sharp CD-BA2600 Instrukcja obsługi - Strona 28
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sharp CD-BA2600. Sharp CD-BA2600 32 stron.
Również dla Sharp CD-BA2600: Skrócona instrukcja obsługi (4 strony)
![Sharp CD-BA2600 Instrukcja obsługi](/uploads/products/server2/5045629/5045629.png)
Enhancing Your System
The connection cord is not included. Purchase a commercially available cord as
shown below.
Red
White
28
„ Listening to the playback sounds from
VCR, DVD, etc.
VCR, DVD, etc.
1
Use a connection cord to connect the VCR, DVD, etc. to the VIDEO/
AUX jacks.
When using video equipment, connect the audio output to this unit and the video
output to a television.
To the line
2
output jack
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
White
Red
4
Play the connected equipment.
Note:
To prevent hum interference, place this unit away from a television.
„ To record on a tape
1
RCA cord
Insert a cassette in the TAPE 2 cassette compartment.
(not supplied)
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE
4
Press the /
5
Play the VCR, DVD, etc.
„ Headphones
z Before plugging in or unplugging the headphones, reduce the volume.
z Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
z Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.
(
) button.
(TAPE 2 ) button.
00/12/4
CD-BA250(U)3.fm