Sharp CD-BK300W Instrukcja obsługi - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sharp CD-BK300W. Sharp CD-BK300W 34 stron.

Drukuj stronę

Listening to the Memorised Station

„ Memorising a station

You can store 40 AM and FM stations in memory and recall them at the push of a but-

ton. (Preset tuning)

Perform the steps 1 - 3 in "Listening to the Radio" on page 18.

Press the MEMORY/SET button to enter the preset tuning saving

mode.

Within 30 seconds, press the

button to select the preset channel number.

Store the stations in memory, in order, starting with preset channel 1.

Within 30 seconds, press the MEMORY/SET button to store that

station in memory.

If the "MEMORY" and preset number indicators go out before the station is

memorised, repeat the operation from step 2.

Repeat steps 1 - 4 to set other stations, or to change a preset sta-

tion.

When a new station is stored in memory, the station previously memorised will

be erased.

Note:

The backup function protects the memorised stations for a few hours should there be

a power failure or the AC power lead disconnection.

E-19

ENGLISH

PRESET

Listening to the Radio (See page 18.)

„ To recall a memorised station

Press the

PRESET

0.5 seconds to select the desired station.

Preset channel

This can be operated by pressing the

button on the remote control.

„ To scan the preset stations

The stations saved in memory can be scanned automatically. (Preset memory scan)

Press the

PRESET

than 0.5 seconds.

z The preset number will flash and the programmed stations will be tuned in se-

quentially, for 3 seconds each.

z This can be operated by pressing the

button on the remote control.

Press the

PRESET

the desired station is located.

„ To erase entire preset memory

Press the ON/STAND-BY button to enter the stand-by mode.

Press the ON/STAND-BY button whilst holding down the TUNER (BAND) button

and X-BASS/DEMO button until "TUNER CL" appears.

PRESET

button for less than

Frequency and frequency band

PRESET /

or PRESET

PRESET

button for more

PRESET /

or PRESET

PRESET

button again when