Sharp CD-DP900E Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sharp CD-DP900E. Sharp CD-DP900E 32 stron. Mini component system
Również dla Sharp CD-DP900E: Skrócona instrukcja obsługi (4 strony)

Drukuj stronę

System connections

CD-DP900E

AM loop aerial

FM aerial

Surround speaker

(Right)

Front speaker

(Right)

Removing the transport screw

Before turning the power on, be sure to remove the transport screw on

the back of the unit using a flat head screwdriver or a coin.

Note:

This screw is required when transporting the unit again. Please keep it (see page 29).

Transport screw

Surround speaker

Centre speaker

(Left)

Front speaker

(Left)

Wall socket

(AC 230-240 V, 50 Hz)

Aerial connection

Supplied FM aerial:

Connect the FM aerial wire to the FM 75

OHMS socket and position the FM aerial wire

in the direction where the strongest signal can

be received.

Supplied AM loop aerial:

Connect the AM loop aerial to the AM LOOP

socket. Position the AM loop aerial for opti-

mum reception. Place the AM loop aerial on a

shelf, etc., or attach it to a stand or a wall with

screws (not supplied).

Note:

Placing the aerial on the stereo system or near the AC power lead may cause noise

pickup. Place the aerial away from the stereo system for better reception.

Installing the AM loop aerial:

< Assembling >

External FM aerial:

Use an external FM aerial if you require better reception. Consult your dealer.

02/1/11

CD-DP900E(UK)_1.fm

< Attaching to the wall >

Wall

Screws (not supplied)

External FM aerial