Sharp CD-DP900H Instrukcja obsługi - Strona 38
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sharp CD-DP900H. Sharp CD-DP900H 40 stron. Mini component system
Również dla Sharp CD-DP900H: Instrukcja obsługi (40 strony)
Drukuj stronę
Maintenance
CD-DP900H
ENGLISH
Cleaning the tape-handling parts
Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean
these parts with a cotton swab moistened with commercial head/pinch roller
cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which contains high
voltages.
Playback head
Capstan
Pinch roller
After long use, the deck's heads and capstans may become magnetised, causing
poor sound. Demagnetise these parts once every 30 hours of playing/recording
time by using a commercial tape head demagnetiser. Read the demagnetiser's
instructions carefully before use.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
E-31
B
C
A
TAPE 1
E
B
C
D
TAPE 2
Erase head
Recording/Playback head
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
General
Power source
AC 230 V, 50 Hz
Power consumption
Power on: 116 W
Power stand-by: 0.6 W (*)
Dimensions
Width: 270 mm (10-5/8")
Height: 330 mm (13")
Depth: 355 mm (13-15/16")
Weight
7.2 kg (15.9 lbs.)
( * ) This power consumption value is obtained when the demonstration mode is
cancelled in the power stand-by mode. Refer to page 10 to cancel the demon-
stration mode.
Amplifier
Output power
PMPO: 438 W
Front speakers:
MPO: 146 W (73 W + 73 W) (DIN 45 324)
RMS: 80 W (40 W + 40 W) (DIN 45 324)
RMS: 64 W (32 W + 32 W) (DIN 45 500)
Centre speaker:
MPO: 37 W (DIN 45 324)
RMS: 20 W (DIN 45 324)
RMS: 16 W (DIN 45 500)
Surround speakers:
MPO: 36 W (18 W + 18 W) (DIN 45 324)
RMS: 20 W (10 W + 10 W) (DIN 45 324)
RMS: 16 W (8 W + 8 W) (DIN 45 500)
Front speakers: 6 ohms
Output terminals
Centre speaker: 6 ohms
Surround speakers: 12 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Input terminals
Video/Auxiliary (audio signal): 500 mV/47 kohms
02/1/9
CD-DP900H(H)_3.fm