Sharp CD-E200H Instrukcja obsługi - Strona 22

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sharp CD-E200H. Sharp CD-E200H 41 stron. Mini component system

Listening to the radio

CD-E200H

ENGLISH

" Tuning

Press the ON/STAND-BY button to turn the power on.

Press the TUNER (BAND) button repeatedly to select the

desired frequency band (FM or AM).

E-15

Press the TUNING/TIME (

) button to tune in to the de-

sired station.

Manual tuning:

Press the TUNING/TIME button as many times as required to

tune in to the desired station.

Auto tuning:

When the TUNING/TIME button is pressed for more than 0.5

seconds, scanning will start automatically and the tuner will

stop at the first receivable broadcast station.

Notes:

! This can be operated by pressing the TUN. (

on the remote control.

! When radio interference occurs, auto scan tuning may stop

automatically at that point.

! Auto scan tuning will skip weak signal stations.

! To stop the auto tuning, press the TUNING/TIME button

again.

! When an RDS (Radio Data System) station is tuned in, the

frequency will be displayed first, and then the RDS indicator

will light. Finally, the station name will appear.

! Full auto tuning can be achieved for RDS stations "ASPM",

see page 22.

To receive an FM stereo transmission:

Press the TUNER (BAND) button to display the "ST" indicator.

! " " will appear when an FM broadcast is in stereo.

FM stereo mode indicator

FM stereo receiving indicator

! If the FM reception is weak, press the TUNER (BAND) button to

extinguish the "ST" indicator. The reception changes to monau-

ral, and the sound becomes clearer.

03/2/10

CD-E200H(H)E2.fm

) button