Sharp CD-ES777 Instrukcja obsługi - Strona 29

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sharp CD-ES777. Sharp CD-ES777 36 stron. Sharp mini component system operation manual
Również dla Sharp CD-ES777: Skrócona instrukcja obsługi (2 strony)

Drukuj stronę

When the preset time is reached, playback or recording

will start.

The volume will increase gradually until it reaches the preset

volume.

When the timer end time is reached, the system will enter

the power stand-by mode automatically.

Once timer:

The timer will be canceled.

Daily timer:

The timer will operate at the same time every day. It will

continue until the daily timer setting is canceled. Cancel the

daily timer when it is not used.

Note:

When performing timer playback or recording using another unit

connected to the GAME INPUT jacks, select "GAME" in step 9.

This unit will turn on or enter the power stand-by mode automatically,

however, the connected unit will not turn on or off.

Checking the timer setting in the timer stand-by mode:

1 Press the CLOCK/TIMER button.

2 Within 10 seconds, press the

"ONCE" or "DAILY", and press the MEMORY button.

3 Within 10 seconds, press the

"ONCE CAL" or "DAILY CAL", and press the MEMORY button.

The unit returns to the timer stand-by mode after displaying the

settings in order.

Canceling the timer setting in the timer stand-by mode:

1 Press the CLOCK/TIMER button.

2 Within 10 seconds, press the

"ONCE" or "DAILY", and press the MEMORY button.

3 Within 10 seconds, press the

"ONCE OFF" or "DAILY OFF", and press the MEMORY button.

Timer will be canceled (the setting will not be canceled).

Reusing the memorized timer setting:

The timer setting will be memorized once it is entered. To reuse the

same setting, perform the following operations.

1 Turn the power on and press the CLOCK/TIMER button.

2 Within 10 seconds, press the

"ONCE" or "DAILY", and press the MEMORY button.

3 Within 10 seconds, press the

"ONCE ON" or "DAILY ON", and press the MEMORY button.

4 Press the ON/STAND-BY button to enter the power stand-by

mode.

CD-ES777

button to select