Sharp CD-ES900 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sharp CD-ES900. Sharp CD-ES900 36 stron. Sharp operation manual mini component system cd-es900 cp-es900
Również dla Sharp CD-ES900: Instrukcja obsługi (36 strony)

Drukuj stronę

! Antenna connection

Supplied FM antenna:

Connect the FM antenna wire to the FM 75 OHMS terminal and

position the FM antenna wire in the direction where the strongest

signal can be received.

Supplied AM loop antenna:

Connect the AM loop antenna to the AM LOOP jack. Position the

AM loop antenna for optimum reception. Place the AM loop antenna

on a shelf, etc., or attach it to a stand or a wall with screws (not sup-

plied).

Note:

Placing the antenna on the unit or near the AC power cord may

cause noise pickup. Place the antenna away from the unit for better

reception.

Installing the AM loop antenna:

< Assembling >

< Attaching to the wall >

Wall

Screws (not supplied)

! Speaker connection

Connect the black wire to the minus (-) terminal, and the red wire to

the plus (+) terminal.

Caution:

" Use speakers with an impedance of 6 ohms or more, as lower im-

pedance speakers can damage the unit.

" Do not mistake the right and the left chan-

nels. The right speaker is the one on the right

side when you face the unit.

" Do not let the bare speaker wires touch

each other.

" Do not allow any objects to fall into or to be

placed in the bass reflex ducts.

" Do not stand or sit on the speakers. You may

be injured.

! Placing the speaker system

The left and right speakers have individual shapes. For best perfor-

mance, place the speakers according to the diagram below.

Left speaker

Note:

The speaker grilles are not removable.

Red

Black

Incorrect

Right speaker

CD-ES900

CD-ES99