Sharp CD-G15000 Instrukcja obsługi - Strona 36

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sharp CD-G15000. Sharp CD-G15000 48 stron. Speaker system
Również dla Sharp CD-G15000: Skrócona instrukcja obsługi (2 strony)

Drukuj stronę

Recording on a cassette tape (continued)

CD-G15000

CP-G15000

To perform programmed recording:

1 Program discs and tracks. (See page 26.)

2 Press the

button.

3 Press the

button.

To stop recording:

Press the

button.

The disc and tape will stop.

Recording from the radio

Tune in to the desired station. (See page 31.)

Load a cassette into the TAPE 2 cassette compartment

with the side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be

performed.

Press the

button.

Recording will be paused.

Press the

button to start recording.

To interrupt recording:

Press the

button.

To resume recording, press the

To stop recording:

Press the

button.

Note:

If you hear a whistling noise while recording an AM station, move the

AM loop antenna.

button.

Dubbing from tape to tape

You can record from TAPE 1 to TAPE 2.

Press the ON/STAND-BY button to turn the power on.

Load a prerecorded cassette

into the TAPE 1 cassette com-

partment. Insert a blank tape

into the TAPE 2 cassette com-

partment.

It is recommended that the recording tape is the same length as

the master tape.

Press the TAPE (1

2) button until "TAPE 1" appears on

the display.

Press the

button.

Recording will be paused.

Press the

button to start dubbing.

To stop dubbing:

Press the

button.

TAPE 1 and TAPE 2 will simultaneously stop.

Erasing recorded tapes

1 Load the tape to be erased into the TAPE 2 cassette

compartment with the side to be erased facing toward you.

2 Press the TAPE (1

2) button until "TAPE 2" appears on the

display.

3 Press the

button.

4 Press the

button to start erasing.

Note:

Make sure that the TAPE 1 is not in use.

TAPE 1

TAPE 2