Sharp CD-XP200H Instrukcja obsługi - Strona 21

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sharp CD-XP200H. Sharp CD-XP200H 37 stron. Mini component system

Listening to the radio

" Tuning

Press the ON/STAND-BY button to turn the power on.

Press the TUNER (BAND) button repeatedly to select the desired

frequency band (FM or AM).

Press the TUNING/TIME (

) button to tune in to the desired

station.

Manual tuning:

Press the TUNING/TIME button as many times as required to tune in to the de-

sired station.

Auto tuning:

When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning

will start automatically and the tuner will stop at the first receivable broadcast sta-

tion.

Notes:

! When radio interference occurs, auto scan tuning may stop automatically at

that point.

! Auto scan tuning will skip weak signal stations.

! To stop the auto tuning, press the TUNING/TIME button again.

! When an RDS (Radio Data System) station is tuned in, the frequency will be

displayed first, and then the RDS indicator will light. Finally, the station name

will appear.

! Full auto tuning can be achieved for RDS stations "ASPM", see page 21.

To receive an FM stereo transmission:

Press the TUNER (BAND) button to display the "ST" indicator.

! " " will appear when an FM broadcast is in stereo.

FM stereo mode indicator

FM stereo receiving indicator

! If the FM reception is weak, press the TUNER (BAND) button to extinguish the

"ST" indicator. The reception changes to monaural, and the sound becomes

clearer.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

02/02/19

CD-XP200H(H)E2.fm

CD-XP200H

ENGLISH

E-14

Sound control (See page 9.)