Sharp XL-MP10H Instrukcja obsługi - Strona 25

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sharp XL-MP10H. Sharp XL-MP10H 33 stron. Micro component system

Drukuj stronę

Recording on a cassette tape

Before recording:

" When recording important selections, make a preliminary test to

ensure that the desired material is properly recorded.

" SHARP is not liable for damage or loss of your recording arising

from malfunction of this unit.

" The volume and sound controls can be adjusted with no effect on

the recorded signal (Variable Sound Monitor).

" For recording, use only normal tapes. Do not use metal or

CrO tapes.

" Do not use C-120 tapes or poor-quality tapes, as they may cause

malfunctions.

Erase-prevention tab of cassette tapes:

" When recording on a cassette tape,

make sure that the erase-prevention

tabs are not removed. Cassettes have

removable tabs that prevent acciden-

tal recording or erasing.

" To protect the recorded sound, re-

move the tab after recording. Cover

the tab hole with adhesive tape to

record on the tape without the tab.

! Recording from a disc

Press the ON/STAND-BY button to turn the power on.

Press the FUNCTION button until "CD DISC" appears on

the display.

When operating with the remote control, press the CD button.

Load the desired disc.

Load a cassette into the cassette compartment with the

side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be

performed.

Press the

button.

Press the

button, which also

engages the

button.

Press the

button again to cancel the pause mode.

Press the

( ) button to start recording.

04/11/1

XL-MP10H(H)E2.fm

XL-MP10H

ENGLISH

Side A

Tab for

side B

side A

E-18

TINSZA033SJZZ