Sharp AL-2051 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wszystko w jednej drukarce Sharp AL-2051. Sharp AL-2051 45 stron. Digital multifunctional system
Również dla Sharp AL-2051: Instrukcja obsługi (41 strony), Instrukcja serwisowa (6 strony)

Drukuj stronę

DIGITAL MULTIFUNCTIONAL SYSTEM

START GUIDE

This guide explains how to install the machine, and indicates important points to note for installation and usage. Read and understand this guide to ensure

that you install the machine correctly. The Operation Guide for the machine is on the accompanying CD-ROM. The procedure for viewing the guide is

explained in "6. HOW TO USE THE OPERATION GUIDE". After installation, read the Operation Guide to make full use of all the machine has to offer.

1. CHECKING PACKED COMPONENTS AND

ACCESSORIES

Open the carton and check if the following components and accessories

are included.

If anything is missing or damaged, contact your authorized service

representative.

If the machine does not function properly during setup or use,

or if a function cannot be used, see "TROUBLESHOOTING

AND MAINTENANCE" (p.137).

START GUIDE

CD-ROM

TD cartridge

3. INSTALLING THE TD (TONER DEVELOPER) CARTRIDGE

Open the bypass tray, and

then open the side cover.

Close the front cover and then the side cover by pressing the

round projections near the side cover open button.

When closing the covers, be sure to close the front cover

securely and then close the side cover. If the covers are

closed in the wrong order, the covers may be damaged.

Power cord

Drum cartridge

(installed in unit)

Press gently on both

sides of the front cover to

open the cover.

2. PREPARING THE MACHINE FOR

INSTALLATION

Be sure to hold the handles on both

sides of the machine to unpack the

machine and carry it to the installation

location.

Remove all pieces of tape shown in the illustration below and then open

the RSPF and remove the protective materials. Take out the bag

containing the TD cartridge.

Remove the TD cartridge from the bag. Hold the

cartridge on both sides and shake it horizontally

four or five times. Hold the tab of the protective

cover and pull the tab to your side to remove the

cover.

4 or 5 times

Ensure that the power switch of the

unit is in the OFF position. Insert the

attached power cord into the power

cord socket at the rear of the unit.

MODEL: AL-2051

While pushing the lock

release button, gently

insert the TD cartridge

until it locks into place.

Lock release button

Plug the other end of the power cord

into the nearest outlet.

Only insert the power cord

into a properly grounded wall

socket.

Do not use extension cords or

power strips.