Sharp AR-5516S Instrukcja obsługi - Strona 21

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wszystko w jednej drukarce Sharp AR-5516S. Sharp AR-5516S 32 stron. Digital multifunctional system

Drukuj stronę

SETTING UP BUTTON MANAGER

Button Manager is a software program that works with the scanner driver to enable scanning from the machine.

To scan using the machine, Button Manager must be linked with the scan menu on the machine. Follow the steps

below to link Button Manager to scanner events.

When using AR-5516N/5520N, note that you need to connect to the scanner function using SC-Scan A previously

(see "CONNECTING TO AND DISCONNECTING FROM THE SCANNER FUNCTION USING SC-Scan A" in the

Operation Guide).

Windows XP/Vista

Click the "Start" button, click "Control

Panel", click "Hardware and Sound",

and then click "Scanners and

Cameras".

In Windows XP, click the "start" button, select

"Control Panel" and click "Printers and Other

Hardware", and then click "Scanners and

Cameras".

Click the "SHARP AR-XXXX" icon and

select "Properties".

In Windows XP, select "Properties" from the

"File" menu.

In the "Properties" screen, click the

"Events" tab.

Select "ScanMenu SC1" from the

"Select an event" pull-down menu.

Select "Start this program" and then

select "Sharp Button Manager U" from

the pull-down menu.

Repeat Steps 4 and 5 to link Button

Manager to "ScanMenu SC2" through

"ScanMenu SC6".

Select "ScanMenu SC2" from the "Select an

event" pull-down menu. Select "Start this

program", select "Sharp Button Manager U" from

the pull-down menu. Do the same for each

ScanMenu through "ScanMenu SC6".

Click the "OK" button.

Button Manager is now linked to the scan menu

(1 through 6).

The scan settings for each of scan menu 1

through 6 can be changed with the setting

window of Button Manager.

For the factory default settings of the scan menu

and the procedures for configuring Button

Manager settings, see "BUTTON MANAGER

SETTINGS" in the Operation Guide.

SETUP