Sharp AR-5625 Podręcznik online - Strona 32

Przeglądaj online lub pobierz pdf Podręcznik online dla Wszystko w jednej drukarce Sharp AR-5625. Sharp AR-5625 36 stron. Ar-m250/m310/5600 series
Również dla Sharp AR-5625: Instrukcja obsługi (4 strony)

Drukuj stronę

TROUBLESHOOTING

Print quality is not satisfactory

The printed image is coarse

■ Has the printer driver been specified to suit both

paper and the print job?

You can select "Draft", "Normal" or "Photo" for the print

quality in the "Advanced" tab of the printer driver setup

screen. When "Photo" is selected, you can click the "Image

Adjustment" button and adjust the brightness and contrast in

the dialog box that appears. Adjust these settings

appropriately for your print data and try printing again.

The printed image is distorted

■ Is the paper loaded correctly?

If a document is physically damaged when it is output or the

image is skewed on the paper, discard the damaged sheet,

reinsert the paper supply and print again. Insert the paper so

that there is no visible space between the paper and the

paper guides.

☞

See the operation manual for copier for more details on

inserting paper.

C O N T E N T S

Part of the printed image is missing

■ Did you set sufficient margins in the paper settings

of your application?

Printing is not possible at the edges of the paper. The print

margins are 5/32" (4 mm) at the top and bottom of the paper

and 1/8" (3 mm) at the sides of the paper. When configuring

the paper settings in the software application, be sure to

establish margins that are at least as large as the print

margins.

■ Is the paper size loaded in the tray the same as that

specified in the printer driver?

Check if the "Paper Size" options suit the size of the paper

loaded in the tray.

If the "Fit To Page" setting is activated, make sure that the

paper size selected from the drop-down list of the "Fit To

Paper Size" option is the same as the size of the loaded

paper.

■ Is the orientation of document setting correct?

Click the "Paper" tab in the printer driver setup screen, and

verify if the "Image Orientation" option is set to your

requirements.

(part 2)