INSTALLING
USING THE "ADD PRINTER WIZARD"
Before installation
Before installing the printer drivers, check the following items.
G Ensure that your computer system meets the following requirements.
Computer type:
IBM PC/AT or compatible computer
Hardware requirements of the operating system
must be satisfied.
When using the "Add Printer Wizard" to install printer drivers, enter the directory name indicated below as a
source directory.
I I I I Example of installation of a printer driver using the "Add Printer Wizard" in Windows Me
The method for installing a printer driver using the "Add Printer Wizard" in Windows Me is shown below.
The installation example assumes that the printer is connected as a local printer (see "CONNECTING THE
MACHINE TO YOUR COMPUTER" on page 12) and that the CD-ROM drive is drive "R". The procedure may
differ depending on the system environment.
Start Windows Me.
1
2
Insert the supplied CD-ROM into the CD-
ROM drive.
On the [Start] menu, select [Settings] and
3
then [Printers].
The Printer window will appear.
4
Double-click the [Add Printer] icon.
Click the [Next] button.
5
I I I I Installing PCL Display Fonts
The PCL display fonts are fonts displayed on your computer screen. The "PRINTER UTILITIES" CD-ROM
contains the PCL display fonts that correspond to the resident fonts in the machine. These display fonts can be
installed to your computer (Windows 95/98/Me/NT 4.0/2000/XP) from the installer. You can select installation of
the PCL fonts as explained in "Installing the software in Windows 95/98/Me" in "Installation method 1" on page 6.
When installing the PCL display fonts using the Windows installation procedure instead of the installer ([Start] -
[Settings] - [Control Panel] - [Fonts] - [Install] - [New Font]), specify the following path.
R:\Font\PCLFont (Where "R" represents the letter of your CD-ROM driver.)
PRINTER
Operating system:
Microsoft Windows 95
Microsoft Windows 98
Microsoft Windows Me
Microsoft Windows 2000
Microsoft Windows NT 4.0 (Service Pack 3 or later)
Microsoft Windows XP
Path for using PCL5c driver in Windows 2000/XP
R:\Drivers\Printer\EnglishA\2kxp
Path for using PCL5c driver in Windows 95/98/Me
R:\Drivers\Printer\EnglishA\9xme
Path for using PCL5c driver in Windows NT 4.0
R:\Drivers\Printer\EnglishA\nt40
Check the [Local Printer] radio button and
6
then click the [Next] button.
7
Click the [Have Disk] button.
The "Install From Disk" dialog box will appear.
Enter the file path as follows:
R:\Drivers\Printer\EnglishA\9xme
8
Click the [OK] button.
9
Select the printer model to be used and
click the [Next] button.
Follow the instructions displayed by the "Add
Printer Wizard".
DRIVERS
11
Drukuj stronę