Sharp AR-C360P Instrukcja instalacji oprogramowania - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji oprogramowania dla Wszystko w jednej drukarce Sharp AR-C360P. Sharp AR-C360P 29 stron. Sharp ar-c360p: supplementary guide
Również dla Sharp AR-C360P: Podręcznik drukowania (46 strony)
Drukuj stronę
®
Windows
USB Connection
1 Connect the USB Cable
For connection to a PC running Windows 98 or
above
Requires a USB cable version 2.0 or above. Printer
operation is not assured if a USB compatible device
is connected concurrently with it.
1. Turn printer power OFF.
2. Connect USB cable between the printer and
computer.
Installation
2 Install the Fiery PostScript Printer Driver
The installation procedure may vary slightly
depending on the operating system you are
using. Drivers are provided for Windows
2000, Me, and 98.
1. Make sure the cable is connected to your printer
and PC and your printer is turned OFF.
2. Insert the printer driver CD (CD1) into your
CD-ROM drive. The CD will autorun.
If it doesn't, click Start → Run → Browse.
Browse to your CD-ROM drive. Double-click
Install.exe. Click OK.
3. Select your language.
4. The License Agreement appears. Click Next to
accept.
5. Select Custom Install to select software tools to
be installed with the printer driver.
To install only the printer driver, select Minimal
Install and skip the next step.
6. The Software Installation screen appears. Click
the Printer Driver Installer button.
7. Click Local printer. Click Next.
8. Select the USB port. Click Next.
9. Select your printer model.
10.Select the PS (PostScript) printer emulation.
Click Next.
11.If prompted, type a printer name for your
printer. Click Next.
12.If prompted, select "do not share this printer"
Click Next.
13.Drivers are copied. If
appears, follow on-screen instructions.
14.Switch the printer ON.
8
NOTE
®
XP,
message
Connect cable