Sharp AR-M620U Podręcznik techniczny - Strona 33
Przeglądaj online lub pobierz pdf Podręcznik techniczny dla Wszystko w jednej drukarce Sharp AR-M620U. Sharp AR-M620U 48 stron. Digital multifunctional system
Również dla Sharp AR-M620U: Instrukcja obsługi klucza (20 strony)
Test
Sub
Command
Code
18
19
20
21
22
23
24
25
26
27
66
28
29
30
31
32
33
34
35
36
39
60
02
67
11
16
TEST SIMULATIONS
Used to check the dial signal DTMF output in the fax dial
tone mode set by soft switch.
Used to back up data in the fax SRAM to the flash
memory (ARMM9 must be installed).
Used to read the back up data by SIM-19.
Used to print information related to fax communication
management.
Used to adjust the handset volume.
Used to download fax program.
Used to clear the fast memory data.
Used to register fax number for modem dial-in.
Used to register external telephone number s for modem
dial-in.
Used to register the transfer number for voice warp.
Used to record voice messages.
Used to clear data related to an address bbok.
Used to check the change in the TEL/LIU status.
Used to set on/off of each port to output to the TEL/LIU.
Used to check the receive data.
Used to check the signal busy/tone/cng/ced/fnet/dtmf
detection.
Used to measure the communication time of test image
data.
Modem program reloading.
Used to check interface between MFPC controller and
MDMC.
Used to set the destination specifications.
Used to set ACR data.
Printer Parallel I/F operation check.
Used to set printer I/F select in signal.
Used to check the operation of the network card.
33
Description
February 2005