Sharp M160D Instrukcja obsługi - Strona 25

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wszystko w jednej drukarce Sharp M160D. Sharp M160D 32 stron. Digital multifunctional system manual for printer and scanner

Drukuj stronę
Sharp M160D Instrukcja obsługi
USING THE SYSTEM SETTINGS
Follow the steps below to access the system settings for the printer and scanner functions.
1
Press the [SPECIAL FUNCTION] key.
The special function screen
ON LINE
DATA
appears.
SPECIAL
FUNCTION
LINE
COPY
EXPOSURE
PAPE
DATA
SCAN
COLOR MODE
RESOLUT
2
Select "SYSTEM SETTINGS" with the
[ ] or [ ] key.
PQ
UPLEX
LEX SCAN
LEX SCAN
ACC
3
Press the [OK] key.
GHI
BACK
OK
PQRS
X
AN
The administrator password
entry screen will appear.
4
Use the numeric keys to enter the
administrator password.
ABC
DEF
INTERRU
GHI
JKL
MNO
PQRS
TUV
WXYZ
@.- _
ACC. #-C
READ-END
• " " will appear for each digit entered.
• The mode selection screen will appear.
5
Select the desired mode with the [ ]
or [ ] key.
24
SPECIAL FUNCTION
PAPER SIZE SET
DISPLAY CONTRAST
TOTAL COUNT
SYSTEM SETTINGS
Enter admin
password.
ADMIN PASSWORD:
-----
MODE SELECT
CHANGE ADMIN PW
COPIER
PRINTER
SCANNER
MODE SELECT
CHANGE ADMIN PW
COPIER
PRINTER
SCANNER
6
Press the [OK] key.
OK
The settings of the
selected mode will
appear.
Example: The above screen shows the settings when
printer mode is selected.
7
Select the desired program with the
[ ] or [ ] key.
• A checkbox appears to the left of several of the
programs. To enable a function (make a checkmark
appear), press the [OK] key. To cancel a selection,
press the [OK] key once again to remove the
checkmark and disable the function. Go to step 9.
• When the [OK] key is pressed for a program that
does not have a checkbox, the settings for the
program appear.
8
Press the [OK] key and follow the
instructions in the program screen.
OK
9
To use another program for the same
mode, select the desired program with
the [ ] or [ ] key.
To use a program for a different mode, press the
[BACK] key and select the desired mode. To exit
the system settings, press the [CA] key (
PRINTER
NOTICE PAGE
FORCED OUTPUT OF
PRINT
).