FiberHome AN5506-04-FA Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Router sieciowy FiberHome AN5506-04-FA. FiberHome AN5506-04-FA 15 stron. For 3bb
Również dla FiberHome AN5506-04-FA: Instrukcja (12 strony)
Drukuj stronę
Step 2 : SSID Settings for Wireless 2.4G or Wireless 5G
- Click Advanced(7)for Wireless 2.4G or 5G
)
just one signal
- SSID
Choice(9)
- SSID
Name(10)
-
Passphrase(11)
depend on Security Mode)
- Click
Apply(12)
- After finishing, you can try searching for SSID name that you set and enter the password to test connection
- If the signal is connected, enter URL Website to access the internet
4. DHCP Settings
DHCP Settings and IP Address management is IP management and distribution that do not give duplicate IP to
protect the problem when you using
- Click
Network(1)
--> Click DHCP
Follow these
settings(3)
- Type ; Choose Server
- DHCP Start IP ; Set the begin IP Address that you want to use
- DHCP End IP ; Set the end IP Address that you want to use
- DHCP Subnet Mask ; 255.255.255.0 You can change or use as Default
- Click
Apply(4)
- DHCP Settings finishing
; 1 (Choose the required number of signals)
; Choose Enable to open the signal
; Named that you want (not more than 32 characters)
; Enter the required password (8-63 characters can enter both letters and numbers
to record Wireless settings
Server(2)
Advanced(8)
for Wireless 5G (
--> screen showing DHCP Service
You can choose to set both or