Sharp SJ-408M Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Lodówka Sharp SJ-408M. Sharp SJ-408M 16 stron.

Drukuj stronę

Installation

Keep adequate ventilation space around the

refrigerator.

The picture shows the minimum required space for

installing the refrigerator. The measurement condition

of energy consumption is conducted under a different

space dimension.

60mm

or more

Rear clearance

The space between the rear of the refrigerator and the

wall should be 50mm or more, and less than 75mm. If

the space is wider than 75mm, you may get injured by

touching compressor and its peripheral parts which are

extremely hot during the operation.

Note

• By keeping greater space, the refrigerator may consume

a less amount of power consumption.

• If use the refrigerator in the smaller space dimension

than figured, it may cause temperature rise in the unit,

loud noise and failure.

• Do not push the refrigerator against the wall. The wall

surrounding the refrigerator may get dirty or discolored

because of the air flow caused by heat radiation.

Overall space required in use

SJ-268M

SJ-286M

SJ-288M

SJ-326M

SJ-FTS07AVS

SJ-FTS08AVS

SJ-FTS09AVS

SJ-RX30E

SJ-RX34E

980mm

1113mm

90mm

or more

60mm

or more

SJ-366M

SJ-406M

SJ-408M

SJ-FTS11AVS

SJ-FTS12AVS

SJ-RX38E

SJ-RX42E

1090mm

1215mm

Use the adjustable foot to place the refrigerator flatly

and firmly on the floor.

Adjustable

foot

Note

• Place your refrigerator to access the plug.

• Keep your refrigerator out of direct sunlight and do not

place next to heat generating appliance.

• Do not place your refrigerator directly on the ground.

Insert suitable stand such as wooden board under the

refrigerator.

Before using your refrigerator

Clean the inside parts with a cloth soaked in warm water.

If soapy water is used, wipe it off thoroughly with water.

Free standing type