Sharp SJ-W40J-GY Instrukcja serwisowa - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Lodówka Sharp SJ-W40J-GY. Sharp SJ-W40J-GY 32 stron.
Drukuj stronę
(2) Disassembly, assembly and adjustment of R & L door
1 List of parts concerned with R & L door
1
1
1
1
Silicon grease
(Before replacing door,
also prepare silicon grease.)
Door cam support
Door cam bl
R-door stopper l
Roller l ass'y
2 Installation and removal of R & L door
2
2
2
2
(1) Open the door.
(2) Remove the door cam. (3 screws)
(3) Close the door, and open its opposite side.
In this time, hold the door with both hands to
prevent the door from falling.
NOTE
When replacing the door with the new
one, coat grease on the slide surface.
(Grease all door arms on the four
corners.)
(4) Pull off the door upward.
(5) For installation, reverse the above procedure.
Door cam tr
Door cam tl
Roller r ass'y
Door cam
support
Door cam br
R-door stopper l
Figure F-6
Top hinge cover
Top hinge cover
Special screw
Hinge cam tl
Table support
Bottom hinge
Body
ass'y
Hinge pin
Hinge projection
Figure F-7
Greasing surface
All around the
side surface
Figure F-8
9
SJ-40J-GY/ BE
SJ-W40J-GY/ BE
SJ-36J-GY/ BE
SJ-W36J-GY/ BE
Top hinge ass'y
Hinge cam tr
Special screw
Screw
The door cam tr is
shown here.
The door cam tr is
shown here.
All around the side
surface, and bottom
surface