Sharp Notevision PG-D3550W Instrukcja konfiguracji - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Projektor Sharp Notevision PG-D3550W. Sharp Notevision PG-D3550W 26 stron. True wxga data projectors and short-throw true wxga data projector
Również dla Sharp Notevision PG-D3550W: Instrukcja obsługi (9 strony), Skrócona instrukcja obsługi (2 strony), Specyfikacje (2 strony)
Drukuj stronę
3. Setting up a Network Con-
nection for the Projector
Settings for such items as the projector's
IP address and subnet mask are
compatible with the existing network.
Set each item on the projector as follows.
(See page 55 of the projector's operation
manual for setting.)
DHCP Client: Off
IP Address: 192.168.150.002
Subnet Mask: 255.255.255.000
1
1
Start Internet Explorer (version 6.0
or later) on the computer, and
enter "http://192.168.150.2/" in
"Address", and then press the
"Enter" key.
2
2
If a user name and a password
have not yet been set, just click
the "OK" button.
•
If a user name and a password have been
set, input the user name and the password,
and click the "OK" button.
•
If the user name or password is entered
incorrectly three times, an error message will
be displayed.
•
When you are using Internet Explorer 7 or
later, other setup screen may be displayed. In
this case, make the proper adjustments for
the setup screen.
3
3
When the screen as shown on the
right appears, click "TCP/IP".
Setting up the Projector Network Environment
-15