Sharp XG-SV200X Instrukcja konfiguracji - Strona 19
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Projektor Sharp XG-SV200X. Sharp XG-SV200X 26 stron. Swivel mount projector series
Również dla Sharp XG-SV200X: Specyfikacje (4 strony), Specyfikacje (2 strony)
Drukuj stronę
Setting and Adjusting the
Projector
(Settings & Adjustments)
Example: "Picture" screen display for COMPUTER1
On these screens, you can make projector
settings or adjustments. You can set or
adjust the following items:
•
Picture Mode
•
CLR Temp
TM
•
BrilliantColor
•
DNR
•
Eco + Quiet
•
Resolution Setting
•
Signal Type
•
Dynamic Range
•
Video System
•
Video Setup
•
Resize
•
Overscan
•
OSD Display
•
Background
•
Memory Load
Note
•
If you click the "Refresh" button before the
screen is displayed completely, an error
message ("Server Busy Error") will be
displayed. Wait for a moment and then operate
again.
•
You cannot operate this page while the
projector is warming up.
•
For details about each item, refer to the
projector's operation manual.
•
Projection Mode
•
Wall Color
•
OSD Language
•
Auto Sync
•
Auto Power Off
•
Auto Restart
•
Internal Speaker
•
Audio Out
•
RS-232C Speed
•
Fan Mode
•
COMPUTER2 Select
®
TM
•
DLP
Link
®
TM
•
DLP
Link
Invert
•
Rotate Indicator
•
All Reset
Controlling the Projector via LAN
Setting the Security
(Network – Security)
On this screen, you can make settings
relating to security.
Items
User Name
Setting of user name for security
protection.
Password
Setting of password for security
protection.
Accept IP
It is possible to set up to three IP
Address
addresses allowing connection to the
projector.
All IP
No limits are set to IP addresses
Addresses
connecting to the projector.
From only
For security improvement, only an IP
specifi c IP
address set by "Address 1-3" can be
addresses
connected to the projector.
Note
•
User Name and Password can be up to 8
characters.
•
You can input the characters below:
a-z, A-Z, 0-9, -, _
Description
-19