Digital Alert Systems MultiPlayer DASMP Skrócona instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik Digital Alert Systems MultiPlayer DASMP. Digital Alert Systems MultiPlayer DASMP 13 stron.
Drukuj stronęDigital Alert Systems
Wiring the MultiPlayer
Program Audio
Wiring the MultiPlayer is very straightforward. Audio connections are made for each of stations through the ports. Recall
Under DASDEC MultiStation control Station 1 is hardcoded to MultiPlayer Port 1. Station 2 is hardcoded to MultiPlayer Port 2
and so on with Station 5 is tied to the DASDEC internal audio program switch(es) as depicted in Figure 1.
The MultiPlayer features automatic program bypass in the event of power fail. In this way the program input will automatically be
routed to the program output should power be loss or by command from the DASDEC.
1. For a digital or mono audio connection, make the program audio connections as follows
MultiPlayer Connection
Port 1
Port 2
Port 3
Port 4
MASTER
Revision 4.0
Figure 6 DASDEC and MultiPlayer audio program wiring configuration
DASDEC MultiStation Number
(Order in the MultiStation pull-down menu after Base Station)
(DASDEC AES output loops through the MultiPlayer's MASTER
port to provide "live" audio during an EAN)
Setup > Decoder > Forwarding
DASDEC MultiStation 2
DASDEC MultiStation 3
DASDEC MultiStation 4
DASDEC MultiStation 5
MultiPlayer Quick Start Guide
Page 7 of 13