DIGITAL ALLTEK WL50 Instalacja i skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instalacja i skrócona instrukcja obsługi dla Adapter DIGITAL ALLTEK WL50. DIGITAL ALLTEK WL50 7 stron. Wireless adaptor/antenna
Drukuj stronęWL50 Quick Start Guide
DIGITAL ALLTEK
You should now return to the same window as you were at before, but now the correct location for the Windows XP
drivers should be in the white entry box to the left of the "Browse" button (see Fig 5). Click the "Next" button
Figure 6
Figure 5
Windows should now start to install the driver and you will see the
window shown in Fig 6. This takes a few moments to complete but
when finished you will see the window in Fig 7.
This indicates that everything has installed correctly and your WL50 is
now ready to be used.
Click the "Finish" button to close the "Found New Hardware Wizard"
and return to normal Windows operation.
Figure 7
If your laptop has a built-in, normal wireless adaptor, then you should turn it off whenever the WL50 is plugged in. Consult
your laptop instruction manual to find out how to do this. Following this procedure whenever the WL50 is plugged in, will
ensure that you connect via the WL50 to get the best signal range possible.
The WL50 should now appear as one of the Wireless Network Adaptors available on your PC. On the taskbar, right click
on the wireless network icon and select the option "View Available Wireless Networks". Select the Wireless network that
you wish to connect to and click the "Connect" button (see Fig 8).
Figure 8