Shimano BR-M6000 Podręcznik sprzedawcy - Strona 36
Przeglądaj online lub pobierz pdf Podręcznik sprzedawcy dla Akcesoria rowerowe Shimano BR-M6000. Shimano BR-M6000 39 stron. Hydraulic disc brake
Również dla Shimano BR-M6000: Podręcznik sprzedawcy (39 strony)
Drukuj stronę
MAINTENANCE
Replacing the brake pads
Replacing the brake pads
This brake system is designed to automatically adjust the clearance between the disc brake rotor and the brake pads by the piston gradually
protruding according to the wear of the brake pads; therefore, when you replace the brake pads, you need to push back the piston.
If oil adheres to the brake pads, if the brake pads are worn down to a thickness of 0.5mm, or if the brake pad presser springs are interfering with
the disc brake rotor, replace the brake pads.
BR-M8000
(A)
1
BR-M6000
2
Clean the pistons and surrounding area.
3
To be continued on next page
Remove the wheel from the frame, and
remove the brake pads as shown in the
illustration.
(B)
(C)
Use a flat-shaped tool to push the
pistons straight back in as far as they will
go, while being careful not to twist the
pistons.
(A)
NOTE
TECH TIPS
36
(A)
Brake pad
(B)
Snap ring
(C)
Split pin
(A)
Piston
NOTE
Do not push the pistons with a sharp tool.
The pistons may be damaged.