Shimano BR-M6000 Podręcznik sprzedawcy - Strona 34
Przeglądaj online lub pobierz pdf Podręcznik sprzedawcy dla Akcesoria rowerowe Shimano BR-M6000. Shimano BR-M6000 39 stron. Hydraulic disc brake
Również dla Shimano BR-M6000: Podręcznik sprzedawcy (39 strony)
Drukuj stronę
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. List of Tools to be Used
- 4. Installation
- 4. Disc Brake Mount Adapter (for 180Mm Disc Brake Rotors)
- 4. Disc Brake Rotor Adapter
- 4. Brake Hose
- 5. Maintenance
- 5. Adding Shimano Genuine Mineral Oil and Bleeding Air
- 5. Replacing the Brake Hose
- 5. Replacing the Brake Pads
MAINTENANCE
Replacing the brake hose
(A) (C)
4
(A)
5
Model No.
SM-BH59-JK-SS
SM-BH90-SS
To be continued on next page
(C)
(A)
(z)
(B)
(D)
(E)
(z)
(B)
(C)
Length
13.2mm
11.2mm
Use a tapered tool to smooth out the
inside of the cut end of the brake hose,
and mount the connector insert.
Connect the brake hose to TL-BH61 and
secure TL-BH61 in a vise, as shown in the
illustration.
Then, hammer down the connector
insert until the connector insert mount
comes into contact with the end of the
brake hose.
(z)
SM-BH59-JK-SS/SM-BH90-SS: 1mm
After checking that the olive is
positioned as shown in the illustration,
grease the screw threads of the
connecting bolt.
(z)
2mm
Color
Gold
Silver
34
(A)
Brake hose
(B)
Olive
(C)
Connector insert
(D)
TL-BH61
(E)
Vise
NOTE
If the end of the brake hose is not in contact
with the connector insert mount, the brake
hose may be disconnected or cause fluid leaks.
(A)
Brake hose
(B)
Olive
(C)
Connector insert
NOTE
Use the dedicated connector insert supplied
with SM-BH59-JK-SS/SM-BH90-SS.
Use of any connector insert other than the
one supplied may produce a loose assembly,
leading to oil leaks or other problems.