Shimano E6000 Series Podręcznik użytkownika - Strona 32
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria rowerowe Shimano E6000 Series. Shimano E6000 Series 38 stron. Total electric power system
Również dla Shimano E6000 Series: Podręcznik użytkownika (47 strony)
Drukuj stronę
Error
If an error message is displayed on the entire screen,
follow one of the procedures below to reset the display.
• Press the power switch of the battery.
• Remove the battery from the holder.
If resetting the battery power does not solve the problem or the
same problem occurs frequently, contact the place of purchase.
List of errors
Situation where
Code
the error occurred
A system error was
E010
detected.
The initialization
E012
of the torque
sensor failed.
A communication
error between the
E020
battery and drive
unit was detected.
A setting error was
E030
detected.
Operational restriction when
an error is being displayed
Power assistance is not
provided during riding.
Power assistance is not
provided during riding.
Power assistance is not
provided during riding.
Power assistance is not
provided during riding.
30
Remedy
Press the power switch of the battery to turn it on
again.
If the situation does not improve, contact the place
of purchase.
With your foot off the pedal, press the battery
power switch and turn on the power again.
If the situation does not improve, contact the place
of purchase.
Check that the cable between the drive unit and
battery is properly connected.
If the situation does not improve, contact the place
of purchase.
If the situation does not improve even after
pressing the battery power switch and turning on
the power again, contact the place of purchase.