Crestron 4 Series Skrócona instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Systemy kontroli Crestron 4 Series. Crestron 4 Series 12 stron. Control processor for zūm lighting control system
Również dla Crestron 4 Series: Skrócona instrukcja obsługi (8 strony), Skrócona instrukcja obsługi (8 strony), Skrócona instrukcja obsługi (6 strony), Skrócona instrukcja obsługi (6 strony), Szybki start (5 strony), Skrócona instrukcja obsługi (6 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Pierwsze kroki (2 strony), Skrócona instrukcja obsługi (2 strony)

Drukuj stronę
Crestron 4 Series Skrócona instrukcja obsługi
ZUM-HUB4
4-Series™ Control Processor for Zūm® Lighting Control System
ZUMLINK-EXP-16A-DIMU load controller:
o
View Current Scene, Daylighting status, and Output
n
Level.
Override: The state of the load when Override is recalled.
n
Click the toggle to turn the load on or off during
Override.
Assign the occupancy mode (Occupancy menu), vacancy
n
mode (Vacancy menu), vicinity mode (Vicinity menu), and
daylight harvesting (Photo menu) to specific load
controllers.
View Dimming Values.
n
Edit the Dimmer Scenes Configuration.
n
Scenes: View and edit room scenes: Scene 1 - Scene 16. When
l
editing the scene, tap the Identify icon
controller. The load controller emits a sound and flashes the
Link LED. The connected loads also flash.
to identify the load
3. Firmware: To update firmware, refer to
Zūm
4. Discovered Room Devices: Identify a device and edit the
commissioning settings
Keypads: Identify and view details for the connected keypad(s).
l
Edit the keypad name and assign the button layout.
Adjust the Double Tap Speed: Set the amount of time
o
between two button presses to qualify as a double tap.
Specify the Button Layout and click on a button to
o
configure button actions.
Button action options:
None
n
Off: Assigned load controllers turn off.
n
On: Assigned loads turn on.
n
Raise: Assigned load controllers raise.
n
Toggle: Switches load controllers between ON and
n
OFF states
Lower: Assigned load controllers lower.
n
Recall Scene 1 - Scene 16: Assigned load controllers
n
recall the behavior set for the specified scene.
Export to Hub: Name and send information to
n
ZUM-HUB4 for macro actions.
Load Shedding: Set the maximum levels for load shedding.
l
Load/Sensor Groups: Create groups within the room.
l
DALI Controllers: Address drivers, create DALI groups, assign
l
drivers, and identify drivers.
Current Scene: Displays the current room scene.
l
Occupancy Status: Displays occupied or vacant. If any area of
l
the room is occupied, then the status is Occupied. When all
areas of the room are vacant, the status is Vacant.
App.
Quick Start
Update Firmware with the
10