Digital Barriers EDGEVIS VIDEO ROUTER 4 Instrukcja instalacji sprzętu - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Router sieciowy Digital Barriers EDGEVIS VIDEO ROUTER 4. Digital Barriers EDGEVIS VIDEO ROUTER 4 16 stron.
Drukuj stronę
EDGEVIS VIDEO ROUTER HARDWARE INSTALLATION
Section 3 – Next Steps...
After unpacking the EdgeVis Video Router, inserting a SIM card, and
powering on, the next step is to perform the initial setup, where comms
settings and server settings are configured.
Setting up the encoder
With the encoder unpacked and all of the physical setup complete it is time to set up the encoder so that it is available
on the EdgeVis Server for viewing. Refer to the EdgeVis Encoder and MiniCam Setup Guide for further details.
Enabling multiple output video streams
The EdgeVis Video Router 4 offers the unique ability to stream four EdgeVis streams to EdgeVis Server simultaneously
– this requires extra steps that are not covered in the Setup Guide. A special Knowledge Base article EdgeVis Video
Router 4 - Enabling multiple output video streams explains how to enable this feature.
ISSUED: 29 NOVEMBER 2022
PAGE 10