Crestron IRP2 Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Systemy kontroli Crestron IRP2. Crestron IRP2 2 stron. Ir emitter probe
Również dla Crestron IRP2: Instrukcja instalacji (12 strony), Instrukcja instalacji (2 strony)

Drukuj stronę

IRP2

IR Emitter Probe

Installation Guide

Description

The Crestron

IRP2 is a pure IR (infrared) emitter that is designed to adhere to the IR

sensor window of a television, an optical disc player, or any other IR-controllable device.

The IRP2 connects to any Crestron control system or room solution box that is equipped

with a 2-pin terminal block-type Crestron IR port, providing a 1-way IR control interface

to the device.

Additional Resources

Visit the product page on the Crestron website (www.crestron.com)

for additional information and the latest rmware updates. Use a QR

reader application on your mobile device to scan the QR image.

Installation

Positioning the IRP2

With many devices, the IRP2 works best when positioned directly over the controlled

device's IR sensor, but with other devices, operation is more consistent when the IRP2 is

placed an inch or two offset from the IR sensor.

It may be dif cult to locate the IR sensor on the controlled device, so instead, test

commands from the Crestron control system or room solution box while moving the IRP2

around the controlled device's front panel. When operation is consistent and reliable,

attach the IRP2 using the procedure below.

Attaching the IRP2

Peel off the clear adhesive strip on the back of the IRP2 shell, and then carefully af x the

IRP2 to the desired location on the controlled device's front panel while pressing rmly.

Attaching the IR Mask (Optional)

Attach the included IR mask when two or more identical components in the same rack

are being controlled. The IR mask prevents stray IR output from accidentally controlling

another device.

To attach the IR mask, t the two pieces together without removing the clear adhesive

strips from the IRP2 shell or the IR mask, and then attach the IRP2 to the controlled

device as described above.

IRP2 Shell and (Optional) IR Mask (Side View)

mask

(optional)

NOTE: If the IRP2's shell must be removed and repositioned for any reason, it may

be necessary to replace the adhesive strip with a new piece of two-sided tape

(supplied) to restore adhesion.

NOTE: The IRP2 is a pure infrared emitter, and it does not emit visible light. Since IR

can be recorded by using a smart device's digital camera, test to see that the IRP2 is

properly working by triggering the IRP2 using the control system or room solution

box. While the IRP2 is being triggered, record a video of the emitter with a smart

phone's digital camera. If IR is visible in the video during playback, the IRP2 is

properly working.

output

Clear adhesive

layer

Miniwire

lead

Internal IR

emitter

output

Clear adhesive

IRP2

shell

layer