Crestron PRO2 Podręcznik - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik dla Systemy kontroli Crestron PRO2. Crestron PRO2 4 stron. Professional dual bus control system

Drukuj stronę

PRO2

PRO2 Professional Dual Bus Control System

Professional Dual Bus Control System

> Cresnet port - master/slave selectable

> 10/100 Ethernet capable | SSL encryption

> e-Control 2 and RoomView enabled

> SNMP support | Built-in firewall, NAT and router

> 6 Com ports, 8 IR/serial ports, 8 Versiport I/O ports, 8

Relay ports

> 3 Y-Bus / 1 Z-Bus control card expansion slots

> Internal power supply | 2-Space EIA rack-mountable

> Front control panel with LCD display

SPECIFICATIONS

Processor

CPU: 32-bit Freescale ColdFire® Microprocessor

Memory

SDRAM:

SDRAM: 64 MB

SDRAM:

NVRAM:

NVRAM: 256 KB

NVRAM:

Flash: 4 MB

Compact Flash: expandable up to 2 GB (not included)

Operating System

Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system

with long names; supports SIMPL™ Windows® and SIMPL+®

Ethernet

With C2ENET-1: 10/100BaseT, auto-negotiating, full/half duplex, static IP or

With C2ENET-1:

DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and

e-mail client; supports Crestron e-Control®2 XPanel and RoomView™

applications

With C2ENET-2:

With C2ENET-2: All above features plus: built-in firewall, router, and network

address translator (NAT)

Y-Bus Connectors & Expansion Slots

40 Mb/s parallel communications;

Internal backplane for integrated control ports and Y-Bus expansion slots

COM A - F: (6) DB9 male, bidirectional RS-232/422/485 ports;

COM A - F:

Up to 115.2k baud;

Hardware and software handshaking support;

Ports C-F support C2N-NPA8 Network Poll Accelerator

INFRARED-SERIAL OUTPUT A - H:

INFRARED-SERIAL OUTPUT A - H: (8) 2-pin 3.5mm detachable terminal

blocks, IR/Serial output ports;

IR output up to 1.2 MHz;

1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud;

Individual signal generator per port allowing simultaneous firing of all ports

I/O Versiports 1 - 8: (1) 9-pin 3.5mm detachable terminal block comprising

I/O Versiports 1 - 8:

(8) digital input/output or analog input ports (referenced to GND);

Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic

threshold 1.24 Volts DC;

Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use

with "real world" loads;

Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum,

input impedance 20k ohms;

Programmable 5 Volts, 2k ohms pull-up resistor per pin

RELAY OUTPUT 1 - 8: (2) 8-pin 3.5mm detachable terminal blocks

RELAY OUTPUT 1 - 8:

comprising (8) normally open, isolated relays;

Rated 1 Amp, 30 Volts AC/DC;

MOV arc suppression across contacts

Expansion Slots:

Expansion Slots: (3) Y-Bus expansion slots;

Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647

Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905

www.crestron.com

Accept all Y-Bus control cards

Z-Bus Expansion Slots

300 Mb/s parallel communications;

Backplane for Z-Bus expansion slots

Expansion Slot: (1) Z-Bus expansion slot;

Expansion Slot:

Accepts all Z-Bus control cards

Additional Connectors

COMPUTER: (2) DB9 female;

COMPUTER:

Front and rear panel RS-232 computer console ports

NET:

NET: (1) 4-pin 5mm detachable terminal block;

NET:

Cresnet port, Master/Slave selectable;

Expandable via C2N-NPA8 Network Poll Accelerator

100-250V~2.3A

50/60 Hz(1) IEC Socket;

Mates with removable power cord, included

Ground: (1) 6-32 screw, chassis ground lug

Ground:

Reset Buttons

HW-R: Hardware reset (reboots the control system)

HW-R:

SW-R: Software reset (restarts the SIMPL program)

SW-R:

Menu Buttons

FUNCTIONS: (6) Up to 6 dynamically assigned functions based upon current

FUNCTIONS:

MENU:

MENU: (1) Returns the LCD display to the MAIN menu

MENU:

UP, DOWN: (2) Scroll up or down through any list displayed in the LCD

UP, DOWN:

display

BKLT: (1) Toggles through 4 levels of backlight intensity for the LCD display

BKLT:

Refer to the Operations Guide for additional menu functions

LCD Display

(2) lines, (40) characters per line;

Reverse mode (yellow and black) backlit LCD;

Displays system information, configuration menus, and custom

programmable user functions

LED Indicators

PWR: (1 green) Indicates AC power supplied to unit

PWR:

NET: (1 yellow) Indicates Cresnet bus activity

NET:

MSG:

MSG: (1 red) Indicates control system has generated an error message

LNK A: (1 red) Indicates a valid connection on LAN port A

LNK A:

ACT A:

ACT A: (1 red) Indicates activity on LAN port A

ACT A:

LNK B: (1 red) Indicates a valid connection on LAN port B

LNK B:

ACT B: (1 red) Indicates activity on LAN port B

ACT B:

COM A - F

(TXD, RXD, RTS, CTS) (24 red) Indicate activity on each respective COM port

IR-SERIAL A - H : (8 red) Indicate activity on each respective IR/Serial port

IR-SERIAL A - H :

INPUT-OUTPUT 1 - 8 :

INPUT-OUTPUT 1 - 8 : (8 red) Indicate activity on each respective I/O

Versiport

RELAY 1 - 8 : (8 red) Indicate contact closure at each respective relay port

RELAY 1 - 8 :

SLOT 1 - 3 :

SLOT 1 - 3 : (3 red) Illuminates to indicate presence of a card in the

SLOT 1 - 3 :

respective expansion slot; extinguishes momentarily to indicate activity

Power Requirements

Main Power : 2.3 Amps, 100-250 Volts AC, 50/60 Hz

Main Power :

Available Cresnet Power: 50 Watts (shared with control card expansion

Available Cresnet Power:

slots)