Digital China Networks WL8200-I2 Instrukcja instalacji - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Bezprzewodowy punkt dostępowy Digital China Networks WL8200-I2. Digital China Networks WL8200-I2 13 stron. Wl8200 series
Drukuj stronęWireless Access Point
Installation Manual
Step 3: Whirl the AP by counterclockwise and closing to the T-keel to make the two
diagonal slots of the mounting kit buckle the T-keel. At the same time, the two elastic
stoppers on the mounting kit buckle the T-keel for locking. After complete the installation, it
is as below:
3.5 Connect AP Power
WL8200 series indoor AP support the local power and PoE power. User can choose
the method according to the actual network environment.
3.5.1 Checking before Power
After installing the AP, user should check it before power every time as below:
When AP use the local power, please ensure the power is connected normally to
ground.
When AP use the 802.3af/at standard PoE power, please ensure the power is
connected normally to ground.
3.5.2 PoE Power
Fig 3-6 Fix the AP on the T-keel
Fig 3-7 Complete the AP installation
3-5
Chapter 3 AP Installation