DIGITAL DELAY 1020-SCR Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Panel sterowania DIGITAL DELAY 1020-SCR. DIGITAL DELAY 1020-SCR 10 stron.
Drukuj stronę
Features:
• Discrete solid state I/O (input - output) construction
• Microprocessor controlled timing with accuracy to 0.0001 of a second
• Retains all numbers even when power is disconnected from the unit
• Large display for easy reading of times
• Low voltage warning and full status indication
• Illuminated liquid crystal display for both day and night use
• Dust & splash proof display lens & key pad with detent (positive feel)
• 1 or 2 pushbutton, bumb up or down, and recovery
• Easy and fast selection or entry of all information even with gloves
• Self test mode on all display functions
• Programmable back-light intensity control
• Very high Transbrake current output (20 Amps)
• Instant timing cycle reset
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Applications:
• Controls Transbrake Solenoids
• Controls 2, 3 and 4-Stage Timers
• Controls 2-Steps
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Specifications:
Input Voltage Range:
•
Dial-In Time Range:
•
Delay Time Range:
•
Flinch Time Range:
•
Push Button Input Current Draw:
•
Transbrake Output Current:
•
Operating Temperature Range:
•
Features, Applications, and
Specifications
10 to 16 Volts DC
00.00 to 99.99 seconds in .01 increments
0.000 to 9.999 seconds in .001 increments
0.000 to 0.999 seconds in .001 increments
20 Amps.
0.1 Amps. at 12 Volts
0 to 150 degrees F
3