Digital Electronics PS-2000B Series Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przechowywanie Digital Electronics PS-2000B Series. Digital Electronics PS-2000B Series 16 stron. Windows xp multi language preinstalled hard disk unit

Drukuj stronę

• Be sure to check that the PS-B's power is disconnected be-

fore installing the unit, in order to prevent an electrical shock.

• Do not attempt to modify or open the HDD unit, since it can

cause a shock or fire.

• When installing the HDD unit, be sure to read the following "2.

Installation" section's information completely to insure that

the unit is correctly installed.

• When this HDD unit is disposed of, it should be done so according

to your country's regulations for similar types of industrial waste.

To Prevent Accidents

• Since the HDD unit is a precision instrument, be sure it is neither hit by nor

pressed strongly against another object. After unpacking, be sure the unit is not

dropped or jolted during installation. Also, a PS-B built in to a larger unit (i.e.

operation panel) should be removed and packed separately prior to shipping.

• Be sure water, liquids or metal particles are not allowed to enter the HDD unit.

Any of these may cause either a breakdown or an electrical shock.

• Do not place or store this unit in a location where there is direct sunlight, exces-

sive heat, dust or vibration.

• Do not store or operate this unit near chemicals, or where there are chemical fumes.

• Do not allow anyone other than Pro-face's own service staff to perform mainte-

nance or adjustments to this unit.

• Do not move or shift the PS-B while the HDD unit is installed and the PS-B

unit's power is ON.

• Do not use the HDD unit in locations where corrosive gasses are present, since

they can lead to a hard disk breakdown.

• To prevent damage to file data, be sure to shut down the PS-B unit's OS before

turning OFF the main power.

• To prevent HDD memory leaks, restart the OS periodically.

• In order to extend the lifetime of the hard disk, Pro-face recommends you set the

Windows [Control panel]-[Power Management option]-[Turn off hard disks]

selection to turn the hard disk off when the unit is not being operated. A setting

of 5 minutes is recommended.

Safety Cautions

WARNINGS

-5-