Bittium OmegaSnap Skrócona instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt medyczny Bittium OmegaSnap. Bittium OmegaSnap 6 stron. Ecg electrode
Drukuj stronę
Quick Guide for using Bittium OmegaSnap™ ECG Electrode
2.
Make sure the electrode pouch is unopened before use.
Tear open the pouch and remove the electrode.
HOLD
HOLD
II
REMOVE THIS
I
REMOVE THIS AFTER APPLYING TO THE SKIN
II
REMOVE THIS AFTER APPLYING TO THE SKIN
I
REMOVE THIS AFTER APPLYING TO THE SKIN
II
REMOVE THIS
II
REMOVE THIS AFTER APPLYING TO THE SKIN
4.
Fix the electrode onto the
skin. Place the top of the
electrode approximately
two fingers' width below
the suprasternal notch. The
bottom of the electrode
reaches just above the
diaphragm.
Copyright © 2021-03-09 Bittium. All rights reserved. Document number: 5800638A01.
1.
If needed, remove excess body
hair using a razor or an electric
shaver. Clean the skin accord-
ing to the instructions given
by your clinic or the person
responsible for treatment. The
skin should be clean and dry
when attaching the electrode.
3.
Remove the plastic liner
(marked I) of the electrode.
Do not touch the adhesive
surface with fingers.