Digital Equipment PrintServer 32 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Drukarka Digital Equipment PrintServer 32. Digital Equipment PrintServer 32 20 stron. Controller firmware version 3.6 upgrade
Również dla Digital Equipment PrintServer 32: Podręcznik (6 strony)
Drukuj stronęUsing the Optional Large Capacity Input Tray
This book describes the following operator functions for the PrintServer 32
Printer Optional Large Capacity Input Tray (OLCIT).
Adding paper (capacity 3000 sheets of 20 lb paper)
•
•
Clearing paper jams
•
Troubleshooting
Refer to the PrintServer 32 Printer Operator's Guide for information on using the
PrintServer 32 printer.
The following conventions are used in this manual:
Table 1–1 Conventions
Note
Key
1.1 Supported Paper Sizes
The Optional Large Capacity Input Tray (OLCIT) is designed to accept the
following paper sizes printed in either landscape (long edge feed) or portrait
(short edge feed) mode:
•
Letter (LT) (8.5 inch x 11 inch)
•
Letter (LTR) (11 inch x 8.5 inch)
•
A4 (297 mm x 210 mm)
•
A4R (210 mm x 297 mm)
Use recommended paper only, as listed in the PrintServer 32 Printer Operator's
Guide.
Conventions
A note provides important additional information.
A key name is shown enclosed in a box to indicate that you press
that key on the control panel. Key names are always shown in initial
capital letters.
Using the Optional Large Capacity Input Tray 1–1
1