Accutron Guardian Monitor 38003 Guardian Monitor 38005 Instrukcja instalacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System bezpieczeństwa Accutron Guardian Monitor 38003 Guardian Monitor 38005. Accutron Guardian Monitor 38003 Guardian Monitor 38005 12 stron. Conventional manifold/alarm system
Drukuj stronę
II. TANK CYLINDER RESTRAINTS
Center the tank restraint's mounting brackets directly beneath the main manifold and attach them to
the wall 40 inches up from the floor. When attaching the tank restraint brackets, locate wall studs and
secure the brackets to the wall using the 3 1/2-inch black screws.
Note: When studs are not available to secure the brackets directly to the wall, it is
recommended that a mounting board 48 to 60 inches wide, 4 inches tall and 1 inch thick
be secured to the wall studs.
III. PRESSURE REGULATORS
Arrange gas tanks in the tank restraints with the nitrous oxide tanks to the left and the oxygen tanks
to the right.
1. Take the nitrous oxide pressure regulator(s) from the shipping carton and remove the red cap(s)
from the DISS gas fitting(s).
2. Attach the nitrous oxide pressure regulator(s) to the
nitrous oxide gas tank(s). Position the regulator(s) to
the left of the gas tank(s), in such a manner that the
pressure gauge(s) can be easily read.
3. Take the oxygen pressure regulators from the ship-
ping carton and remove the red caps from the DISS
gas fittings.
4. Attach the oxygen pressure regulators to the 2 oxygen
gas tanks. Position the regulators to the left of the gas
tanks, in such a manner that the pressure gauges can
be easily read.
5