Epson WorkForce WF-3540 Skrócona instrukcja obsługi - Strona 34
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drukarka Epson WorkForce WF-3540. Epson WorkForce WF-3540 44 stron. Epson workforce wf-3540 all-in-one printer
Również dla Epson WorkForce WF-3540: Instrukcje (4 strony), Przegląd i specyfikacja produktu (2 strony), Podręcznik użytkownika (13 strony), (Podręcznik instalacji (4 strony)
Faxing Problems
■
Make sure the recipient's fax machine is turned on and working.
■
Make sure the
that the telephone wall jack works by connecting a phone to it.
■
Make sure Auto Answer is on to receive faxes automatically (see page 19).
■
If your phone line includes voicemail answering services, turn off Auto Answer.
Otherwise, calls or faxes may be inadvertently received by your voicemail service.
■
If the line has static, press
Fax Settings
setting.
■
If the product is connected to a DSL phone line, you must have a DSL filter
connected to the phone jack. Contact your DSL provider for the filter.
■
If you connected a telephone or answering machine, make sure it is connected to the
port. Do not use a phone splitter.
EXT.
Print Quality Problems
■
Make sure your paper is loaded printable side down in the cassettes (usually the
whiter, brighter, or glossy side).
■
For the best print quality, use EPSON papers (see page 4) and genuine EPSON ink
cartridges (see page 26).
■
Make sure the type of paper you loaded matches the paper type setting on the control
panel or in your printer software (see page 15).
■
If you notice light or dark bands across your printouts or they are too faint, run a
nozzle check (see page 23) to see if the print head needs cleaning.
■
If you notice jagged vertical lines, you may need to align the print head. See the online
User's Guide for instructions.
■
The ink cartridges may be low on ink. Check your cartridge levels (see page 25) and
replace cartridges, if necessary (see page 26).
■
Clean the scanner glass with a soft, dry, lint-free cloth (paper towels are not
recommended), or use a small amount of glass cleaner on a soft cloth, if necessary. Do
not spray glass cleaner directly on the glass.
34
Problems and Solutions
port on the product is connected to a telephone wall jack. Verify
LINE
if necessary, press l or r, then select
, then
Communication
. Turn off the
ECM
. Select
Setup
(Error Correction Mode)