Bitvae S3 Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Elektryczna szczoteczka do zębów Bitvae S3. Bitvae S3 12 stron. Sonic electric toothbrush
Również dla Bitvae S3: Instrukcja obsługi (9 strony)
Drukuj stronęreminds you to charge in time
-Please insert the charging cable into the charging port. After the power is
safely connected to the power supply, the charging white light flashes slowly
to indicate that it is charging.
- After fully charged, the charging lights are all on for 2 minutes and then
turn off.
2. Steps of brushing teeth
-Fix the brush head to the handle.
-Wet the bristles and squeeze an appropriate amount of toothpaste.
-The toothbrush is tilted 45° and placed at the junction of the teeth and the
gums.
-Select the appropriate mode to start the toothbrush and move slowly.
-Change the brushing area every 30 seconds and automatically shut down after 2
minutes.
-After using, rinse the toothbrush with clean water and wipe it clean.
Common Problems
Why is there a record of zero brushing time in the report?
Because the brushing time is the accumulated effective brushing time, when the correct brushing posture is not
detected in the process of brushing, the record of brushing time is 0.
If the device cannot start, it may be caused by the following conditions
1. The power supply is too low, and the power supply light will flicker when the power is low.It can be started
after deep charging
2. The device is in charge
3. There is a foreign body stuck at the switch
How to update the firmware program of the toothbrush equipment?
Connect the toothbrush device, enter "Settings" - "Firmware Upgrade" on the home page, and upgrade can be
done according to the prompts
Can't access the real-time brushing interface while brushing?
Please start the APP cold 2. In standby state, long press the toothbrush on key for 10s until the running light
comes down once, and then press the switch again to wake up