Siemens SIMATIC NET Instrukcja instalacji - Strona 29

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Urządzenia przemysłowe Siemens SIMATIC NET. Siemens SIMATIC NET 34 stron. Network components bus terminal
Również dla Siemens SIMATIC NET: Instrukcja obsługi (29 strony), Instrukcja obsługi (50 strony), Instrukcja obsługi (28 strony), Instrukcja montażu (6 strony), Informacje o produkcie (6 strony), Instrukcja instalacji (40 strony), Instrukcja instalacji (50 strony), Instrukcja instalacji (40 strony), Podręcznik referencyjny (14 strony), Instrukcja instalacji (48 strony), Instrukcja obsługi (32 strony)

Drukuj stronę
Siemens SIMATIC NET Instrukcja instalacji
Certification
6.1.2 TÜV SÜD
6.1.2
TÜV SÜD
This device is certified by TÜV SÜD to meet the requirements of the following
standards:
•
•
6.1.3

FCC

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to
correct the interference on his own expense.
6.1.4

ISED

This device is declared by Siemens AG to meet the requirements of the following
ISED (Innovation Science and Economic Development Canada) standard:
•
6.1.5

ISO

This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
•
20
CSA-C22.2 NO. 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National standard, with UL 62368-1)
UL 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements)
CAN ICES-3 (A)/NMB-3 (A)
ISO 9001:2015
Quality management systems – Requirements
RUGGEDCOM RP100
Installation Manual, 01/2021, C79000-G8976-1011-05