Siemens SIMATIC RF360R Instrukcja obsługi systemu - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi systemu dla Urządzenia przemysłowe Siemens SIMATIC RF360R. Siemens SIMATIC RF360R 16 stron.

1.1 SIMATIC RF360R

Accessories required

You need the following accessories:

• For connecting the power supply

M12 plug (4-pin, L-coded) and 4-wire cable (4 x 1.5 mm

• for PROFINET IO connection

M12 plug (4-pin, D-coded) and 4-wire Ethernet cable (Twisted Pair, shielded)

You can find the associated article numbers in the section "AUTOHOTSPOT".

Connect the plug

Proceed as follows to connect the device:

1. Push the respective plug into the corresponding round socket on the reader.

Make sure the connectors and sockets are properly interlocked (tongue and groove).

2. Fasten the connector by tightening the knurled locking ring.

To guarantee the degree of protection, you must fasten all connectors with ≃ 1.0 Nm.

1.1.5

Pin assignment of the interfaces

The following tables show the pin assignment for the interfaces/connectors.

Table 1-2

NOTICE

Ensuring the degree of protection

You need to close all unused sockets with M12 sealing caps to ensure IP65 or IP67 degree

of protection. You can find the order data of the sealing caps in the section "AUTOHOTSPOT".

Pin assignment power supply; M12 socket (4-pin, L-coded)

Assignment

+24 V (brown)

Unassigned (white)

Ground/shield (blue)

Reset to Factory (black)

)

View of M12 socket, 4-pin

System Manual, xx/2020, C79000-G8976-C345-08

SIMATIC RF300