Siemens SIMATIC RTLS4030G Instrukcja obsługi - Strona 31
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia przemysłowe Siemens SIMATIC RTLS4030G. Siemens SIMATIC RTLS4030G 34 stron. Localization systems
Również dla Siemens SIMATIC RTLS4030G: Instrukcja obsługi urządzenia (19 strony), Instrukcja obsługi (26 strony)
Drukuj stronę
• EN 61000-6-2
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial
environments
• EN 61000-6-3
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for
residential, commercial and light-industrial environments
• EN 61000-6-4
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for
industrial environments
• EN 61000-6-8
Electromagnetic compatibility (EMC) - Part 6-8: Generic standards - Emission standard for
professional equipment in commercial and light-industrial locations
Article 3 (2) Efficient use of the radio spectrum
• ETSI EN 300 328
Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz
ISM band and using wide band modulation techniques. Harmonized standard covering the
essential requirements of article 3.2 of the EU Directive 2014/53/EU
• ETSI EN 302 065-2
Short Range Devices (SRD) using ultra-wideband technology (UWB); Harmonized standard
covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2:
Requirements for UWB location tracking
FCC information
Siemens SIMATIC RTLS4030G (MLFB 6GT2701-5DB13); FCC ID SCF6032502
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
SIMATIC RTLS4030G
Operating Instructions, 05/2023, C79000-G8976-C515-10
Approvals
31