Siemens SIMATIC RTLS4030G Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia przemysłowe Siemens SIMATIC RTLS4030G. Siemens SIMATIC RTLS4030G 34 stron. Localization systems
Również dla Siemens SIMATIC RTLS4030G: Instrukcja obsługi urządzenia (19 strony), Instrukcja obsługi (26 strony)
Drukuj stronę
List of available protocols
The following is a list of all available protocols and their ports through which the device can
be accessed.
Table 1- 1
List of available protocols
Service/
Protocol/
Protocol
port number
Ethernet/TFTP
UDP 69
Ethernet/HTTP
TCP 80
Ethernet/IP
TCP 1010
Ethernet/IP
TCP 1011
Ethernet/Telnet
TCP 9999
Ethernet/IP
UDP/TCP 30704
Ethernet/IP
UDP/TCP 30718
* Port 30718 is open once for commissioning. It is then closed again.
• Service/protocol
Protocols supported by the device.
• Protocol/port number
Port number assigned to the protocol.
• Default port status
– Open
– Closed
• Configurable port
Indicates whether the port can be configured.
• Authentication
Specifies whether authentication of the communication partner takes place.
• Encryption
Specifies whether the transfer is encrypted.
Recycling and disposal
The products are low in harmful substances, can be recycled and meet the requirements of
the Directive 2012/19/EU for disposal of waste electrical and electronic equipment (WEEE).
Do not dispose of the products at public disposal sites.
For environmentally compliant recycling and disposal of your electronic waste, please contact
a company certified for the disposal of electronic waste or your Siemens representative.
Note the different national regulations.
SIMATIC RTLS4030G
Operating Instructions, 05/2023, C79000-G8976-C515-10
Default port
status
Closed
Closed
Open
Closed
Closed
Closed
Open*
The port is open when you start configuring.
The port is closed when you start configuring.
Configurable
Authentication
port
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Introduction
Encryption
No
No
No
No
No
No
No
9