Siemens SIMOGEAR 2730 Instrukcja montażu i obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja montażu i obsługi dla Urządzenia przemysłowe Siemens SIMOGEAR 2730. Siemens SIMOGEAR 2730 48 stron. Geared motor with rotary encoder for safety-relevant applications

Drukuj stronę

NOTICE

Damage to equipment due to unsuitable tightening tools.

Unsuitable tightening tools or fastening methods can damage the screws of the equipment.

• Only use screw inserts that exactly match the screw head.

• Tighten the screws with the torque specified in the technical documentation.

• Use a torque wrench or a mechanical precision nut runner with a dynamic torque sensor and

• Adjust the tools used regularly.

Unexpected machine movement caused by radio devices or mobile phones

Using radio devices, cellphones, or mobile WLAN devices in the immediate vicinity of the

components can result in equipment malfunction. Malfunctions may impair the functional

safety of machines and can therefore put people in danger or lead to property damage.

• Therefore, if you move closer than 20 cm to the components, be sure to switch off radio

• Use the "SIEMENS Industry Online Support App" or a QR code scanner only on equipment

Unrecognized dangers due to missing or illegible warning labels

Dangers might not be recognized if warning labels are missing or illegible. Unrecognized

dangers may cause accidents resulting in serious injury or death.

• Check that the warning labels are complete based on the documentation.

• Attach any missing warning labels to the components, where necessary in the national

• Replace illegible warning labels.

SIMOGEAR functionally safe rotary encoder

Operating Instructions, 01/2024, A5E53220857A/RS-AA

speed limitation system.

WARNING

devices, cellphones or WLAN devices.

that has already been switched off.

WARNING

language.

Fundamental safety instructions

2.1 General safety instructions