Siemens SIWAREX WL230 BB-S SA Instrukcja obsługi sprzętu - Strona 35
Przeglądaj online lub pobierz pdf Instrukcja obsługi sprzętu dla Urządzenia przemysłowe Siemens SIWAREX WL230 BB-S SA. Siemens SIWAREX WL230 BB-S SA 50 stron. Base plate and elastomer bearing bb-s sa
Również dla Siemens SIWAREX WL230 BB-S SA: Podręcznik (36 strony), Instrukcja obsługi (48 strony), Instrukcja obsługi (44 strony)
Drukuj stronę
5.3.2
Preparing the guide element
Procedure
1. Unpack the guide element.
2. Check the Scope of delivery guide element (Page 7).
5.3.3
Locking the top plate
Procedure
• For a stable starting position, rotate the top hexagon nuts alternately up to the stop.
5.3.4
Fixing of guide element
Procedure
1. Position the bottom flange with two cylinder head screws.
2. Position the top flange with two cylinder head screws.
3. Position the turnbuckle.
4. Align the flanges with the top/base plate.
5. Tighten the cylinder head screws with the specified tightening torque (Page 39).
6. Tighten the fixing screws of the turnbuckle with the specified tightening torque (Page 39).
5.3.5
Lowering the load bearing implement onto the load cells
Procedure
NOTICE
Damaging the compact mounting unit
When individual hexagon nuts are overloaded, the compact mounting unit can be damaged.
By loosening a hexagon nut, the weight of the load bearing implement is distributed among
the other hexagon nuts and is partially increased.
• Loosen the hexagon nuts in turn in small steps bracket by bracket.
1. Loosen the top hexagon nuts in several cycles.
2. Slowly lower the load bearing implement and the top plate.
SB-S SA
Equipment Manual, 12/2020, A5E02390707B-03
Installation
5.3 Install guide element
35